How to Use a Jack Stand on Your Car

As a vehicle owner, one of the things that you are always after is comfort and safety while driving. It is therefore important that you outline on simple procedures that you can undertake to ensure that you achieve this. One of the most important car parts of the vehicle that ensure security and ultimately safety are the shock absorbers in the vehicle. It is therefore important that you learn on how to inspect, remove, to remove and to maintain the condition of your shock absorbers.

If you need to inspect on the shock absorbers, you will need to use the services of a jack which is a mechanical support device created for the function of supporting the weight of your vehicle. You need to know of the best location t install your jack stand so as to avoid placing excessive pressure on your vehicle and having it very high. If you are working on a small vehicle, you can opt to place the jack on the front suspension parts while working on the front suspension or the pinch wield of the vehicle.

If you are working on a larger vehicle, particularly trucks, slide your jack under the radius arm of the vehicle. The radius arm will be most unique to the Ford vehicle model and can be used to take in the pressure. To make the radius arm sit on the jack stand, you should release pressure from your hydraulic jack and this makes the radius arm of the vehicle to slowly sit on the jack stand that ought to be located under the radius arm.

You can also place your jack stand on the pinch wield of your vehicle but please note that you should always look out to avoid areas that are rusting on the pinch wield.

Comments are closed.