How to Install Toyota Tail Lights

Installation of Toyota Tail Lights

Required Tools: 3/8 drive ratcht; 10mm socket; panel popper.

Step one: remove your trunk carpet.

Step two: remove 2 plastic clips securing the plastic truck and take plastic trim away from your car. Now you car remove 3 plastic clips securing the carpet truck liner.

Step three: pull trunk liner aside and use panel popper to remove three 10mm nuts. Then disconnect the tail light harness.

Step four: install a new tail light and tighten it with three 10mm nuts.

Step five: connect tail light harness. Then reinstall the carpet liner and three clips.

Step six: check your tail lights.

Comments are closed.