Guide to Installing Hood Struts on a Toyota Camry

If you have been working on your car engine or other part that will require the hood to be up, there are times that you realize that the hood cannot stay up on its own. In this, you realize that you have to use a broom or even a pole to ensure that you keep your vehicle hood open. Upon realizing this, you should note that it is time to change your hood struts. Changing the hood struts is a simple procedure that you can incorporate yourself to ensure that you do have a great overall result.

To change the hood struts if the Toyota Camry, you need a 12mm and a 13mm wrench. All that you will need to do so that you can change on the gas struts that help keep the hood open is to use a 12mm combination spanner that will allow you in changing loosening up the bolts that hold down the gas struts that hold tit to the hood cover. While undoing these bolts, do ensure that you have a broom or a pole that is supporting the hood so that it does not fall on you as you work.

Most of the replacements that are there come in a 13 mm bolt. You should therefore fasten this using the 13 mm wrench. On the lower side of the hood strut that is attached hear the shock absorber, ensure that you do use the 12 mm bolt that was there as most replacements do not come with this attached. With this done, you can remove the broom for support as the new hood strut is ready to perform its function. You should also use the same procedure to change over to the other side and this will make your hood stand upright and on its own.

Simple Guide to Install A Boost Gauge

A boost gauge is an important component to have installed in your vehicle, particularly if you drive a turbo car. This helps you in monitoring the activity of what the turbo is doing to ensure that you drive safe, enjoy driving and all in all ensure that the turbo is tot pushed too hard. To do this procedure, you will need a socket set to get to all the areas that you need to get to in installing your gauge, a wire, the gauge and the gauge cup that houses the gauge.

To begin this procedure, it is important that you understand on the type of turbo that your car runs on. This will help you in knowing on the preferred type of line is right for the gauge that you have chosen to use. To install a mechanical gauge, you need to install a mechanical line that runs from the engine, to the cabin of the vehicle and into the boost gauge for you to realize a great result. You can make use of the power wire that runs from the engine into the vehicle as this makes the job of installing the vacuum hose quite easy. You should then cover the supply phase of the cable that you have installed to the boost gauge and to the engine bay using a simple T-joint pipe.

This T pipe will be that one that will help in connecting of the boost gauge. You should then run the vacuum hose form the engine bay straight into the vehicle. This makes sure that you do get in to the desired length of cable. Having done this, look at the wire that comes on when you turn on the engine of the vehicle as this is the wire that you need to join to the boost gauge. Join these wires using solder and following on the installation manual. Drill a hole at the back of the new gauge to help run in the hose. With this done install the cup holder of the gauge in the dash and your vehicle boost gauge is good for the road.

Changing Disc Brakes and Tires

Some car parts of your vehicle will need regular maintenance as they undergo wear and tear as you use your vehicle. One of these parts of your vehicle that needs to be addressed is how to change the disc brakes.

First off, you will start by jacking up your vehicle so that you can get the required clearance off the ground. The best place that you should place your vehicle jack is the sub arm of the vehicle as this will give ample support for the vehicle.

You should jack up the vehicle until you come to get some good ground clearance of the wheel. With this done, pop the hood and then open the brake fluid cap which allows pressure to be eased off when you are installing new brake pads.

Upon the removal of the tire you should next remove the 14mm nuts that hold the brake pads in place. With the removal of these, you should get access to the brake pads. You can examine the condition of the brake pads and make a determination on whether these pads need to be changed. If they are won out, remove the pad from the clips that hold it in the brake housing.

With this done, reinstall the brake housing by tying the 14 mm nut that you installed. Make sure that you look at the level of the brake fluid so that it is not above the level that is required. Reinstall the wheel and ensure that it is tight and your brakes are good for the road.

Top 5 Auto Accessories for Moms

If you ask people what auto accessories moms want and you’ll get answers like vanity mirrors, cup holders and safety enhancements. Ask mothers what accessories they’re looking for their daily drive and you’ll get something a little more interesting. And the following auto parts are what Mom wants, along with a few tips on selecting them.


Continue reading

Check Vital Fluids of Your Car

Keep an eye on the fluids of your car and check all the major fluids from time to time to ensure your car safety. You can find where to check fluids of your car by reading your owners’ manual. If your manual is lost in the glove box or you never had one, then ask your mechanic or a friend who knows cars to show you all the places to check. There are several major levels to check on most cars.
Continue reading

Changing Tires for Blowout On The Road

No one wants his or her car has blowout on the road, but it actually happens on many people and their cars. So every car owner needs to know how to change a tire and get your car to the side of the road safely. You should never panic when you encounter these things. Try to stay calm as soon as possible. Slowly take your foot off of the gas and let the vehicle coast to a stop. Do not make any sudden braking or steering actions. Put your flashers on to alert other drivers. Now that you are safely off of the road.
Continue reading

How To Choose Fuel-Efficient Car

Fuel-efficient car is popular among different car buyers. There are different models of fuel-efficient or good gas mileage vehicles, so you should know the right way to choose a good car that will cost you less money over the life of the vehicle.

Fuel efficiency varies widely from one car to the next. Obviously you can check the EPA rating for city/highway MPG on the window sticker, although most of us know the average car never reaches those numbers.
Continue reading

Useful Tips To Buy A New Car

Do you know what the best new car price is? The best price for a new car is usually about 10% of the new car selling price, which does not include normal Sales Tax, DMV Registration, and Documentation Fees.

If you know the best price of your desired car, it will give a solid idea of the lowest price currently available. With this information in mind, you may be satisfied even if the final negotiated number is a few hundred dollars higher than the best new car price.
Continue reading

Replacement Car Wheels for Your Car

Every car has four wheels to move forward. If one of these wheels is not working, then you car cannot go anywhere. Thus, a good car absolutely has good quality car wheels. The size and the quality of the wheels significantly affect your ride quality and handling so always make sure they are in perfect shape and condition. Taking care of them is a must so as not to sacrifice your vehicle’s performance. They also need special attention since they are closest to the road; hence, they are exposed to a lot corrosion-causing elements.

Three aspects of the wheels are relevant to the suspension design: wheel offset, aspect ratio, and tire width. All these should be considered in choosing the best replacement wheels for your vehicle.
Continue reading

Fuel System of Your Vehicle

We know that fuel is very important to any automobiles. If you car has got no fuel, then it cannot move any further. How much do you know about the fuel system of your vehicle? Here you can learn separate parts of fuel system.

Fuel filter: Clean fuel is critical to engine life and performance. Fuel injectors have tiny openings, which clog easily so filtering the fuel is the only way to prevent this. Filters can be before or after the fuel pump, sometimes both.

Fuel pump: On newer cars the fuel pump is usually installed in the fuel tank. Older cars have the fuel pump attached to the engine or on the frame rail between the tank and the engine. If the pump is in the tank or on the frame rail then it is electric and is run by your cars battery. Fuel pumps mounted to the engine use the motion of the engine to pump the fuel.
Continue reading